Simoniz 039-8582-6 Instrukcje Operacyjne Pobierz pdf (Strona 21)

Cleaning and Maintenance

Technical Specifications

7.6 Winterizing Procedure

• Pressure washer might be damaged if subjected to

freezing temperatures. This type of damage is not

covered by the limited warranty. To avoid possible

damages, use a small amount of antifreeze.

• Place the pressure washer on its side, with the

water inlet (14) facing upwards, and pour ¼ cup (60

ml) of antifreeze into the water inlet.

• Make sure the engine 3 in 1 switch (5) is set to

STOP

position and pull the starter cord handle

several times to distribute the antifreeze inside the

pump system.

• When taking the pressure washer out of storage,

run water through the system until it runs clear.

ECHNICAL

PECIFICATIONS

Maximum Pressure

3000 PSI

Rated Water Pressure

2200 PSI

Maximum Water Flow

9 litres per minute

LPM (2.3 gallons

per minute GPM)

Minimum Inlet

Pressure

30 PSI

Maximum Inlet

Pressure

100 PSI

Pump Type

Heavy-duty

maintenance free

axial

Thermal Relief Valve

Included

Detergent Tank

(Volume)

0.32 G each (1.3

Maximum

Temperature of

Pumped Water

104°F (40°C)

Engine Power (OHV)

6.5 HP

No Load Speed

3600 RPM

High Pressure Hose

Length

30' (9 m)

Inlet & Discharge

Ports

¾" (13 mm)

standard garden

hose connector

Displacement

196 (cc)

Net Weight

66 lb.2 oz. (30 kg)

Oil Type

SAE 10W-30

Oil Capacity

0.6 L

Fuel Type

Unleaded

Gasoline

Fuel Tank

2.2 L

IMPORTANT

• If the pressure washer is to be stored with

gasoline in the fuel tank and carburetor, it is

important to reduce the hazard of gasoline vapour

ignition.

• Select a well-ventilated storage comma area away

from any appliance that operates with a flame, such

as a furnace, water heater, or clothes dryer. Also

avoid any area with a spark-producing electric

motor, or where power tools are operated.

• If possible, avoid storage areas with high humidity,

because that promotes rust and corrosion.

• Place the pressure washer on a level surface.

Tilting can cause fuel or oil leakage.

• Do not use plastic sheets as a dust cover. A

nonporous cover will trap moisture around the

pressure washer, promoting rust and corrosion.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Komentarze do niniejszej Instrukcji

Brak uwag

Simoniz 039-8582-6 Instrukcje Operacyjne Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik Simoniz 039-8582-6